How much does a cobble-effect block drive cost in Lincolnshire?
Guide price in Lincolnshire: £100–£160 per m² including VAT, which puts a 50 m² drive at about £5,000–£8,000. These are East Midlands guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £100–£160 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the East Midlands, checked 9 November 2026.
Towns we cover in Lincolnshire
We quote cobble-effect paving in every town across Lincolnshire, including:
What does a cobble-effect block drive involve?
The softer look suits cottages, barn conversions and curved drives, where the rounded edges hide the many cuts a curve needs. Because the blocks come in several sizes, they take longer to lay than standard blocks, and that shows in the price per square metre.
Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.
- Edge cuts blended into curves and corners
- Dig-out, sub-base and edging as for any block drive
- Jointing sand and compaction
- Mixed sizes laid to a planned random or coursed pattern
- Colour and size mix chosen on the survey
What the survey covers
- Access for a mini-digger, skip or grab lorry
- Ground conditions under the old surface and how deep the sub-base must be
- Where an electric vehicle charger cable might run
- Edges against lawns, beds, walls and neighbours
- Block range, thickness, colour and pattern to suit the house
Rules for front drives in Lincolnshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Cobble-effect paving in Lincolnshire: questions
Do you cover Lincoln, Grimsby and Scunthorpe?
Yes. We cover all of Lincolnshire, including Lincoln, Grimsby and Scunthorpe.
How much does a cobble-effect block drive cost in Lincolnshire?
Our guide for Lincolnshire is £100–£160 per m² including VAT, so a 50 m² drive is usually about £5,000–£8,000. Your fixed price follows the survey.
Do I need planning permission for a cobble-effect block drive in Lincolnshire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
