How much does a cobble-effect block drive cost in Cambridgeshire?
Guide price in Cambridgeshire: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,400. These are East of England guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £105–£170 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026.
Towns we cover in Cambridgeshire
We quote cobble-effect paving in every town across Cambridgeshire, including:
What is included?
Tumbled block paving is concrete block that has been rumbled or treated after making so the edges are rounded and the faces look worn. Cobble-effect ranges add three or more block sizes laid in a random or coursed pattern, which gives the look of old setts without their cost or rough surface.
Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.
- Edge cuts blended into curves and corners
- Dig-out, sub-base and edging as for any block drive
- Mixed sizes laid to a planned random or coursed pattern
- Jointing sand and compaction
- Colour and size mix chosen on the survey
What the survey covers
- Ground conditions under the old surface and how deep the sub-base must be
- Steps, thresholds and door heights
- Where an electric vehicle charger cable might run
- Existing manhole and inspection covers, and whether to recess them
- Edges against lawns, beds, walls and neighbours
Rules for front drives in Cambridgeshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Cobble-effect paving in Cambridgeshire: questions
How long does a cobble-effect block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a cobble-effect block drive in Cambridgeshire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Cambridgeshire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a cobble-effect block drive cost in Cambridgeshire?
Our guide for Cambridgeshire is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,400. Your fixed price follows the survey.
