Greater London · Sealing

Block paving sealing in Putney

We quote block paving cleaning and care across Putney and Greater London, working from photos or a quick visit to give you a fixed price.

  • Postcodes SW15, SW18
  • £6–£18 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Block paving sealing in Putney: what to expect

Putney has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.

Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.

How much does a block paving sealing job cost in Putney?

Guide price in Putney£6–£18 per m²Including VAT at 20%

Guide price in Putney: £6–£18 per m² including VAT, which puts a 50 m² drive at about £300–£900. These are London guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Sealing only£6–£18 per m²
Jet wash clean with a rotary cleaner£3–£6 per m²
Clean and re-sand£6–£12 per m²
Clean, re-sand and seal£9.50–£25 per m²

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.

  • Drying time and a date when cars can return
  • Second coat where the product requires it
  • Edges, walls and doors protected
  • Sealer applied evenly by roller or low-pressure sprayer
  • Check that the paving is clean, re-sanded and dry

What we look at first in Putney

  • Type of block and its age
  • Shade and drainage, which affect regrowth
  • Which sealer finish suits a slope or patio
  • Walls, doors and planting to protect
  • Whether any blocks are loose or sunken first

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Sealing in Putney: questions

How often should block paving in Putney be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a block paving sealing job cost in Putney?

Guide price for Putney: £6–£18 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Sealing near Putney

Nearby towns we cover for sealing, and sealing across Greater London:

Other block paving services in Putney

Or see all block paving services in Putney.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote