Planning a block paving sealing job in Battersea
Battersea has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a block paving sealing job cost in Battersea?
Expect block paving sealing jobs in Battersea to come in at around £6–£18 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £300 and £900.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £6–£18 per m² |
| Jet wash clean with a rotary cleaner | £3–£6 per m² |
| Clean and re-sand | £6–£12 per m² |
| Clean, re-sand and seal | £9.50–£25 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Drying time and a date when cars can return
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
Before we price your block paving sealing job
- Type of block and its age
- Shade and drainage, which affect regrowth
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- Which sealer finish suits a slope or patio
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sealing in Battersea: questions
How often should block paving in Battersea be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Battersea?
Guide price for Battersea: £6–£18 per m² including VAT, with a minimum charge for small areas.
Do you cover Fulham, Brixton and Putney?
Yes. We cover Battersea and the places around it, including Fulham, Brixton and Putney, and the rest of Greater London.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Battersea
Nearby towns we cover for sealing, and sealing across Greater London:
- Sealing in Fulham
- Sealing in Brixton
- Sealing in Putney
- Sealing in Streatham
- Sealing in Shepherds Bush
- Sealing in Peckham
