Block paving sealing in Acton: the local picture
Acton has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a block paving sealing job cost in Acton?
Guide price in Acton: £6–£18 per m² including VAT, which puts a 50 m² drive at about £300–£900. These are London guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £6–£18 per m² |
| Jet wash clean with a rotary cleaner | £3–£6 per m² |
| Clean and re-sand | £6–£12 per m² |
| Clean, re-sand and seal | £9.50–£25 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
Before we price your block paving sealing job
- Type of block and its age
- Which sealer finish suits a slope or patio
- Walls, doors and planting to protect
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Acton: questions
How often should block paving in Acton be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Acton?
Guide price for Acton: £6–£18 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Chiswick, Shepherds Bush and Willesden?
Yes. We cover Acton and the places around it, including Chiswick, Shepherds Bush and Willesden, and the rest of Greater London.
Sealing near Acton
Nearby towns we cover for sealing, and sealing across Greater London:
- Sealing in Chiswick
- Sealing in Shepherds Bush
- Sealing in Willesden
- Sealing in Brent
- Sealing in Greenford
- Sealing in Fulham
