Planning a block paved driveway in Acton
Acton has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a block paved driveway cost in Acton?
Most block paved driveway quotes in London fall within £100–£170 per m² including VAT. A 50 m² double drive would usually be about £5,100–£8,400, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £100–£170 per m² |
| Breaking out an old surface | £12–£50 per m² |
| Edging or kerb, bedded and haunched | £25–£60 per metre |
| Typical channel drain run | £420–£1,200 |
| Dropped kerb (vehicle crossover) construction | £1,200–£3,600 |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Survey, measurements and a written, itemised quote
- Sharp-sand laying course screeded to falls
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Crushed-stone sub-base laid in layers and compacted
- Blocks laid in your chosen pattern, with a contrasting border if wanted
What we check on an Acton survey
- Existing manhole and inspection covers, and whether to recess them
- Block range, thickness, colour and pattern to suit the house
- Where an electric vehicle charger cable might run
- Steps, thresholds and door heights
- Trees and roots near the drive
Planning and kerb rules in Acton
Acton is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Block paved driveways in Acton: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a block paved driveway in Acton?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Acton?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Acton
Nearby towns we cover for block paved driveways, and block paved driveways across Greater London:
- Block paved driveways in Chiswick
- Block paved driveways in Shepherds Bush
- Block paved driveways in Willesden
- Block paved driveways in Brent
- Block paved driveways in Greenford
- Block paved driveways in Fulham
