Planning a block paving sealing job in Harlow
Across Harlow, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paving sealing job cost in Harlow?
In the East of England, a block paving sealing job usually costs £5.50–£16 per m² including VAT. For a 50 m² drive, that is roughly £265–£790. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
How we find the cause
- How much joint sand is left
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
- Walls, doors and planting to protect
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Harlow: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Harlow?
Guide price for Harlow: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Harlow be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Waltham Abbey, Loughton and Brentwood?
Yes. We cover Harlow and the places around it, including Waltham Abbey, Loughton and Brentwood, and the rest of Essex.
Sealing near Harlow
Nearby towns we cover for sealing, and sealing across Essex:
- Sealing in Waltham Abbey
- Sealing in Loughton
- Sealing in Brentwood
- Sealing in Chelmsford
- Sealing in Billericay
- Sealing in South Ockendon
