Block paving sealing in Billericay: the local picture
Billericay is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paving sealing job cost in Billericay?
In the East of England, a block paving sealing job usually costs £5.50–£16 per m² including VAT. For a 50 m² drive, that is roughly £265–£790. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
Before we price your block paving sealing job
- Whether any blocks are loose or sunken first
- Moss, algae, weeds and oil staining
- Which sealer finish suits a slope or patio
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Billericay: questions
Do you cover Basildon, Wickford and Brentwood?
Yes. We cover Billericay and the places around it, including Basildon, Wickford and Brentwood, and the rest of Essex.
How often should block paving in Billericay be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Billericay?
Guide price for Billericay: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Billericay
Nearby towns we cover for sealing, and sealing across Essex:
- Sealing in Basildon
- Sealing in Wickford
- Sealing in Brentwood
- Sealing in Pitsea
- Sealing in Stanford-le-Hope
- Sealing in Chelmsford
