County Tyrone · Sealing

Block paving sealing in Dromore

Block paving sealing in Dromore: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes BT78, BT75
  • £5–£14 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Block paving sealing in Dromore: the local picture

Around Dromore, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a block paving sealing job cost in Dromore?

Guide price in Dromore£5–£14 per m²Including VAT at 20%

For Dromore, our guide is £5–£14 per m² including VAT, so a 50 m² drive is likely to be £240–£710. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Sealing only£5–£14 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving sealing job involve?

Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.

  • Edges, walls and doors protected
  • Sealer applied evenly by roller or low-pressure sprayer
  • Drying time and a date when cars can return
  • Second coat where the product requires it
  • Check that the paving is clean, re-sanded and dry

What we look at first in Dromore

  • How much joint sand is left
  • Type of block and its age
  • Moss, algae, weeds and oil staining
  • Walls, doors and planting to protect
  • Whether any blocks are loose or sunken first

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Sealing in Dromore: questions

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Do you cover Omagh and Strabane?

Yes. We cover Dromore and the places around it, including Omagh and Strabane, and the rest of County Tyrone.

How much does a block paving sealing job cost in Dromore?

Guide price for Dromore: £5–£14 per m² including VAT, with a minimum charge for small areas.

How often should block paving in Dromore be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Sealing near Dromore

Nearby towns we cover for sealing, and sealing across County Tyrone:

Other block paving services in Dromore

Or see all block paving services in Dromore.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote