Planning a block paving sealing job in Omagh
Omagh is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.
How much does a block paving sealing job cost in Omagh?
For Omagh, our guide is £5–£14 per m² including VAT, so a 50 m² drive is likely to be £240–£710. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Sealer applied evenly by roller or low-pressure sprayer
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
- Second coat where the product requires it
Before we price your block paving sealing job
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Moss, algae, weeds and oil staining
- Type of block and its age
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Sealing in Omagh: questions
How much does a block paving sealing job cost in Omagh?
Guide price for Omagh: £5–£14 per m² including VAT, with a minimum charge for small areas.
Do you cover Dromore, Strabane and Cookstown?
Yes. We cover Omagh and the places around it, including Dromore, Strabane and Cookstown, and the rest of County Tyrone.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Omagh
Nearby towns we cover for sealing, and sealing across County Tyrone:
