Hertfordshire · Block paved driveways

Block paving driveways in Potters Bar

From EN6 to the villages around Potters Bar, we quote block paved driveways built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes EN6
  • £90–£145 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Planning a block paved driveway in Potters Bar

In and around Potters Bar, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.

How much does a block paved driveway cost in Potters Bar?

Guide price in Potters Bar£90–£145 per m²Including VAT at 20%

For Potters Bar, our guide is £90–£145 per m² including VAT, so a 50 m² double drive is likely to be £4,450–£7,350. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£145 per m²
Breaking out an old surface£11–£40 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£370–£1,050
Dropped kerb (vehicle crossover) construction£1,050–£3,150

Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Edge restraints or kerbs bedded and haunched in concrete
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Crushed-stone sub-base laid in layers and compacted
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Sharp-sand laying course screeded to falls

Before we price your block paved driveway

  • Trees and roots near the drive
  • The kerb: is it already dropped, and is it wide enough?
  • Block range, thickness, colour and pattern to suit the house
  • Steps, thresholds and door heights
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Rules for front drives in Potters Bar

Potters Bar is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Block paved driveways in Potters Bar: questions

How much does a block paved driveway cost in Potters Bar?

Our guide for Potters Bar is £90–£145 per m² including VAT, so a 50 m² double drive is usually about £4,450–£7,350. Your fixed price follows the survey.

Can you match the blocks to my house in Potters Bar?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Potters Bar free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do you cover Borehamwood, Hatfield and Cheshunt?

Yes. We cover Potters Bar and the places around it, including Borehamwood, Hatfield and Cheshunt, and the rest of Hertfordshire.

Block paved driveways near Potters Bar

Nearby towns we cover for block paved driveways, and block paved driveways across Hertfordshire:

Other block paving services in Potters Bar

Or see all block paving services in Potters Bar.

Next step

Get a guide price in two minutes

Ready to talk about your block paved driveway? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote