Hertfordshire · Cleaning

Block paving cleaning in Potters Bar

Block paving cleaning in Potters Bar: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes EN6
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Potters Bar: the local picture

Around Potters Bar, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.

How much does a block paving cleaning job cost in Potters Bar?

Guide price in Potters Bar£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the East of England fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £130–£265, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rinse down of edges, steps and walls
  • Pre-treatment where needed
  • Weeds and moss removed from the joints
  • Optional biocide and sealer
  • Rotary surface clean at a pressure that will not blow out the joints

Before we price your block paving cleaning job

  • Whether any blocks are loose or sunken first
  • Shade and drainage, which affect regrowth
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • How much joint sand is left
  • Type of block and its age

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Cleaning in Potters Bar: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Do you cover Borehamwood, Hatfield and Cheshunt?

Yes. We cover Potters Bar and the places around it, including Borehamwood, Hatfield and Cheshunt, and the rest of Hertfordshire.

How often should block paving in Potters Bar be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Cleaning near Potters Bar

Nearby towns we cover for cleaning, and cleaning across Hertfordshire:

Other block paving services in Potters Bar

Or see all block paving services in Potters Bar.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote