England · Cleaning

Block paving cleaning in Hertfordshire

For drives and patios in Hertfordshire and Watford, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • 19 towns listed
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

How much does a block paving cleaning job cost in Hertfordshire?

Guide price in Hertfordshire£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the East of England fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £130–£265, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the East of England, checked 9 November 2026.

Towns we cover in Hertfordshire

Choose a town for local prices and details for cleaning:

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.

  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rinse down of edges, steps and walls
  • Optional biocide and sealer

How we find the cause

  • Which sealer finish suits a slope or patio
  • Walls, doors and planting to protect
  • Shade and drainage, which affect regrowth
  • Moss, algae, weeds and oil staining
  • Whether any blocks are loose or sunken first

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Cleaning in Hertfordshire: questions

Do you cover Watford, Hemel Hempstead and Stevenage?

Yes. We cover all of Hertfordshire, including Watford, Hemel Hempstead and Stevenage.

How often should block paving in Hertfordshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a block paving cleaning job cost in Hertfordshire?

Guide price for Hertfordshire: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote