What to know before a block paved driveway in Stamford Hill
Stamford Hill has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.
How much does a block paved driveway cost in Stamford Hill?
Guide price in Stamford Hill: £100–£170 per m² including VAT, which puts a 50 m² double drive at about £5,100–£8,400. These are London guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £100–£170 per m² |
| Breaking out an old surface | £12–£50 per m² |
| Edging or kerb, bedded and haunched | £25–£60 per metre |
| Typical channel drain run | £420–£1,200 |
| Dropped kerb (vehicle crossover) construction | £1,200–£3,600 |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Cuts at edges, around covers and against the house
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Crushed-stone sub-base laid in layers and compacted
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Survey, measurements and a written, itemised quote
Before we price your block paved driveway
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Existing manhole and inspection covers, and whether to recess them
- Access for a mini-digger, skip or grab lorry
- Block range, thickness, colour and pattern to suit the house
- Steps, thresholds and door heights
Planning and kerb rules in Stamford Hill
Stamford Hill is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Block paved driveways in Stamford Hill: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a block paved driveway cost in Stamford Hill?
Our guide for Stamford Hill is £100–£170 per m² including VAT, so a 50 m² double drive is usually about £5,100–£8,400. Your fixed price follows the survey.
Can you match the blocks to my house in Stamford Hill?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Stamford Hill
Nearby towns we cover for block paved driveways, and block paved driveways across Greater London:
- Block paved driveways in Tottenham
- Block paved driveways in Holloway
- Block paved driveways in Islington
- Block paved driveways in Walthamstow
- Block paved driveways in Leytonstone
- Block paved driveways in Edmonton
