County Tyrone · Block paved driveways

Block paving driveways in Cookstown

Our block paving driveways service covers Cookstown and nearby Coalisland, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes BT80
  • £80–£135 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Cookstown: the local picture

In and around Cookstown, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a block paved driveway cost in Cookstown?

Guide price in Cookstown£80–£135 per m²Including VAT at 20%

For Cookstown, our guide is £80–£135 per m² including VAT, so a 50 m² double drive is likely to be £4,050–£6,650. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£80–£135 per m²
Breaking out an old surface£9.50–£40 per m²
Edging or kerb, bedded and haunched£19–£50 per metre
Typical channel drain run£330–£950
Dropped kerb (vehicle crossover) construction£950–£2,850

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Survey, measurements and a written, itemised quote
  • Crushed-stone sub-base laid in layers and compacted
  • Cuts at edges, around covers and against the house
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Sharp-sand laying course screeded to falls

What the survey covers

  • Existing manhole and inspection covers, and whether to recess them
  • The kerb: is it already dropped, and is it wide enough?
  • Where an electric vehicle charger cable might run
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Access for a mini-digger, skip or grab lorry

Do you need permission in Cookstown?

Cookstown is in Northern Ireland, so these rules apply:

In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.

Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.

Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Block paved driveways in Cookstown: questions

Is the survey in Cookstown free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How much does a block paved driveway cost in Cookstown?

Our guide for Cookstown is £80–£135 per m² including VAT, so a 50 m² double drive is usually about £4,050–£6,650. Your fixed price follows the survey.

Can you match the blocks to my house in Cookstown?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Block paved driveways near Cookstown

Nearby towns we cover for block paved driveways, and block paved driveways across County Tyrone:

Other block paving services in Cookstown

Or see all block paving services in Cookstown.

Next step

Get a guide price in two minutes

Ready to talk about your block paved driveway? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote