County Tyrone · Cleaning

Block paving cleaning in Cookstown

We clean, re-sand and seal block paving across Cookstown (BT80), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes BT80
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Cookstown: what to expect

Around Cookstown, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.

How much does a block paving cleaning job cost in Cookstown?

Guide price in Cookstown£2.50–£5 per m²Including VAT at 20%

In Northern Ireland, a block paving cleaning job usually costs £2.50–£5 per m² including VAT. For a 50 m² drive, that is roughly £120–£240. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Rotary surface clean at a pressure that will not blow out the joints
  • Optional biocide and sealer
  • Weeds and moss removed from the joints
  • Pre-treatment where needed
  • Kiln-dried sand brushed in once dry (re-sanding package)

What we look at first in Cookstown

  • Moss, algae, weeds and oil staining
  • Walls, doors and planting to protect
  • Whether any blocks are loose or sunken first
  • How much joint sand is left
  • Type of block and its age

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Cookstown: questions

Do you cover Coalisland, Dungannon and Omagh?

Yes. We cover Cookstown and the places around it, including Coalisland, Dungannon and Omagh, and the rest of County Tyrone.

How often should block paving in Cookstown be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Cookstown?

Guide price for Cookstown: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Cleaning near Cookstown

Nearby towns we cover for cleaning, and cleaning across County Tyrone:

Other block paving services in Cookstown

Or see all block paving services in Cookstown.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Cookstown, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote