County Down · Block paved driveways

Block paving driveways in Banbridge

If you are in Banbridge (BT32, BT25) and want a block paved driveway, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes BT32, BT25
  • £80–£135 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Banbridge: the local picture

In and around Banbridge, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.

How much does a block paved driveway cost in Banbridge?

Guide price in Banbridge£80–£135 per m²Including VAT at 20%

For Banbridge, our guide is £80–£135 per m² including VAT, so a 50 m² double drive is likely to be £4,050–£6,650. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£80–£135 per m²
Breaking out an old surface£9.50–£40 per m²
Edging or kerb, bedded and haunched£19–£50 per metre
Typical channel drain run£330–£950
Dropped kerb (vehicle crossover) construction£950–£2,850

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paved driveway involve?

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Survey, measurements and a written, itemised quote
  • Crushed-stone sub-base laid in layers and compacted
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Cuts at edges, around covers and against the house

What the survey covers

  • Access for a mini-digger, skip or grab lorry
  • Whether front-garden planning rules apply
  • Trees and roots near the drive
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Steps, thresholds and door heights

Do you need permission in Banbridge?

Banbridge is in Northern Ireland, so these rules apply:

In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.

Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.

Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Block paved driveways in Banbridge: questions

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Is the survey in Banbridge free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do you cover Newry, Warrenpoint and Newcastle?

Yes. We cover Banbridge and the places around it, including Newry, Warrenpoint and Newcastle, and the rest of County Down.

Block paved driveways near Banbridge

Nearby towns we cover for block paved driveways, and block paved driveways across County Down:

Other block paving services in Banbridge

Or see all block paving services in Banbridge.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote