Block paving cleaning in Tonbridge: what to expect
Tonbridge is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a block paving cleaning job cost in Tonbridge?
In the South East, a block paving cleaning job usually costs £2.50–£5.50 per m² including VAT. For a 50 m² drive, that is roughly £135–£270. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Rinse down of edges, steps and walls
- Pre-treatment where needed
- Optional biocide and sealer
- Weeds and moss removed from the joints
- Rotary surface clean at a pressure that will not blow out the joints
Before we price your block paving cleaning job
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
- Walls, doors and planting to protect
- Whether any blocks are loose or sunken first
- Type of block and its age
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Cleaning in Tonbridge: questions
How much does a block paving cleaning job cost in Tonbridge?
Guide price for Tonbridge: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Tonbridge be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Cleaning near Tonbridge
Nearby towns we cover for cleaning, and cleaning across Kent:
- Cleaning in Tunbridge Wells
- Cleaning in Sevenoaks
- Cleaning in Maidstone
- Cleaning in Swanley
- Cleaning in Strood
- Cleaning in Rochester
