Planning a sunken area repair in Skelmersdale
In Skelmersdale, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a sunken area repair cost in Skelmersdale?
In the North West, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Blocks lifted, cleaned and stacked for re-use
- Sub-base dug out and rebuilt where it has failed
- Investigation of the cause (drain, sub-base, laying course, edging)
- New laying course screeded to the correct level and falls
- Same blocks relaid, re-jointed and compacted
What we look at first in Skelmersdale
- Whether the edging has moved or was never set in concrete
- Falls, so water does not collect again
- Condition and thickness of your existing blocks
- Replacement blocks or hidden blocks to swap in
- Trees, roots and past trenches
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sunken paving in Skelmersdale: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Ormskirk, Chorley and Leyland?
Yes. We cover Skelmersdale and the places around it, including Ormskirk, Chorley and Leyland, and the rest of Lancashire.
Can you repair block paving in Skelmersdale without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
How much does a sunken area repair cost in Skelmersdale?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Sunken paving near Skelmersdale
Nearby towns we cover for sunken paving, and sunken paving across Lancashire:
- Sunken paving in Ormskirk
- Sunken paving in Chorley
- Sunken paving in Leyland
- Sunken paving in Preston
- Sunken paving in Lytham St Annes
- Sunken paving in Darwen
