Block paving repairs in Skelmersdale: what to expect
Skelmersdale is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paving repair cost in Skelmersdale?
Most block paving repair quotes in the North West fall within £200–£650 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our repairs service
Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.
- Damaged blocks cut out without breaking neighbours
- Re-jointing and compaction of the repaired area
- Diagnosis from photos or a visit
- Laying course corrected and re-screeded
- Replacement blocks matched as closely as possible, or sound blocks re-used
What we look at first in Skelmersdale
- Whether a drain or gully is leaking under the paving
- Trees, roots and past trenches
- Whether the edging has moved or was never set in concrete
- How much of the area needs lifting to blend the repair
- Replacement blocks or hidden blocks to swap in
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repairs in Skelmersdale: questions
How much does a block paving repair cost in Skelmersdale?
Our guide is £200–£650 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Ormskirk, Chorley and Leyland?
Yes. We cover Skelmersdale and the places around it, including Ormskirk, Chorley and Leyland, and the rest of Lancashire.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Repairs near Skelmersdale
Nearby towns we cover for repairs, and repairs across Lancashire:
- Repairs in Ormskirk
- Repairs in Chorley
- Repairs in Leyland
- Repairs in Preston
- Repairs in Lytham St Annes
- Repairs in Darwen
