Wiltshire · Replace an old drive

Replacing tarmac or concrete with block paving in Warminster

Planning a replacement block drive in Warminster? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes BA12, BA13
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Warminster

In and around Warminster, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a replacement block drive cost in Warminster?

Guide price in Warminster£95–£180 per m²Including VAT at 20%

Most replacement block drive quotes in the South West fall within £95–£180 per m² including VAT. A 45 m² replacement drive would usually be about £4,300–£8,100, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house

What we check on a Warminster survey

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Whether front-garden planning rules apply
  • Access for a mini-digger, skip or grab lorry
  • Edges against lawns, beds, walls and neighbours
  • Where an electric vehicle charger cable might run

Rules for front drives in Warminster

Warminster is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Replace an old drive in Warminster: questions

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How much does a replacement block drive cost in Warminster?

Our guide for Warminster is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Is the survey in Warminster free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Replace an old drive near Warminster

Nearby towns we cover for replace an old drive, and replace an old drive across Wiltshire:

Other block paving services in Warminster

Or see all block paving services in Warminster.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote