West Midlands · Replace an old drive

Replacing tarmac or concrete with block paving in Willenhall

Planning a replacement block drive in Willenhall? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes WV13, WV12
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Willenhall

Willenhall is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

How much does a replacement block drive cost in Willenhall?

Guide price in Willenhall£95–£180 per m²Including VAT at 20%

In the West Midlands, a replacement block drive usually costs £95–£180 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,300–£8,100. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace
  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road

Before we price your replacement block drive

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Ground conditions under the old surface and how deep the sub-base must be
  • Block range, thickness, colour and pattern to suit the house
  • Steps, thresholds and door heights

Planning and kerb rules in Willenhall

Willenhall is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Replace an old drive in Willenhall: questions

How much does a replacement block drive cost in Willenhall?

Our guide for Willenhall is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do you cover Wednesfield, Wolverhampton and Wednesbury?

Yes. We cover Willenhall and the places around it, including Wednesfield, Wolverhampton and Wednesbury, and the rest of the West Midlands.

Do I need planning permission for a replacement block drive in Willenhall?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Replace an old drive near Willenhall

Nearby towns we cover for replace an old drive, and replace an old drive across West Midlands:

Other block paving services in Willenhall

Or see all block paving services in Willenhall.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Willenhall.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote