West Glamorgan · Replace an old drive

Replacing tarmac or concrete with block paving in Neath

Our replacing tarmac or concrete with block paving service covers Neath and nearby Briton Ferry, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes SA10, SA11
  • £90–£165 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Neath

Homes in Neath include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.

How much does a replacement block drive cost in Neath?

Guide price in Neath£90–£165 per m²Including VAT at 20%

Expect replacement block drives in Neath to come in at around £90–£165 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,000 and £7,550.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£90–£165 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • New edging, sub-base where needed, and the block drive
  • Assessment of the old base: keep, top up or replace
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house
  • Break-out of the old surface with waste removal and skip or grab lorry

Before we price your replacement block drive

  • Ground conditions under the old surface and how deep the sub-base must be
  • Edges against lawns, beds, walls and neighbours
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Steps, thresholds and door heights
  • Block range, thickness, colour and pattern to suit the house

Do you need permission in Neath?

Neath is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Replace an old drive in Neath: questions

Can you match the blocks to my house in Neath?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How much does a replacement block drive cost in Neath?

Our guide for Neath is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.

Do I need planning permission for a replacement block drive in Neath?

In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.

Is the survey in Neath free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Replace an old drive near Neath

Nearby towns we cover for replace an old drive, and replace an old drive across West Glamorgan:

Other block paving services in Neath

Or see all block paving services in Neath.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Neath, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote