Replacing tarmac or concrete with block paving in Walton-on-Thames: the local picture
In and around Walton-on-Thames, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a replacement block drive cost in Walton-on-Thames?
For Walton-on-Thames, our guide is £105–£195 per m² including VAT, so a 45 m² replacement drive is likely to be £4,600–£8,750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £105–£195 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
What we check on a Walton-on-Thames survey
- The kerb: is it already dropped, and is it wide enough?
- Whether front-garden planning rules apply
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Ground conditions under the old surface and how deep the sub-base must be
- Where an electric vehicle charger cable might run
Rules for front drives in Walton-on-Thames
Walton-on-Thames is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Replace an old drive in Walton-on-Thames: questions
Is the survey in Walton-on-Thames free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Can you match the blocks to my house in Walton-on-Thames?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Replace an old drive near Walton-on-Thames
Nearby towns we cover for replace an old drive, and replace an old drive across Surrey:
- Replace an old drive in Sunbury-on-Thames
- Replace an old drive in Esher
- Replace an old drive in Ashford, Surrey
- Replace an old drive in Staines-upon-Thames
- Replace an old drive in Egham
- Replace an old drive in Leatherhead
