Surrey · Replace an old drive

Replacing tarmac or concrete with block paving in Farnham

Planning a replacement block drive in Farnham? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes GU9, GU10, GU12
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Farnham

Farnham is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a replacement block drive cost in Farnham?

Guide price in Farnham£105–£195 per m²Including VAT at 20%

In the South East, a replacement block drive usually costs £105–£195 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,600–£8,750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace

Before we price your replacement block drive

  • Edges against lawns, beds, walls and neighbours
  • Block range, thickness, colour and pattern to suit the house
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • The kerb: is it already dropped, and is it wide enough?

Do you need permission in Farnham?

Farnham is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Replace an old drive in Farnham: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a replacement block drive in Farnham?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

How much does a replacement block drive cost in Farnham?

Our guide for Farnham is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.

Do you cover Godalming, Camberley and Guildford?

Yes. We cover Farnham and the places around it, including Godalming, Camberley and Guildford, and the rest of Surrey.

Replace an old drive near Farnham

Nearby towns we cover for replace an old drive, and replace an old drive across Surrey:

Other block paving services in Farnham

Or see all block paving services in Farnham.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Farnham.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote