What to know before a replacement block drive in Brecon
Brecon is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a replacement block drive cost in Brecon?
Guide price in Brecon: £90–£165 per m² including VAT, which puts a 45 m² replacement drive at about £4,000–£7,550. These are Wales guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Break-out of the old surface with waste removal and skip or grab lorry
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
- New edging, sub-base where needed, and the block drive
What the survey covers
- Edges against lawns, beds, walls and neighbours
- Trees and roots near the drive
- Where an electric vehicle charger cable might run
- Access for a mini-digger, skip or grab lorry
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Brecon
Brecon is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Replace an old drive in Brecon: questions
Do I need planning permission for a replacement block drive in Brecon?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
How much does a replacement block drive cost in Brecon?
Our guide for Brecon is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Replace an old drive near Brecon
Nearby towns we cover for replace an old drive, and replace an old drive across Powys:
- Replace an old drive in Llandrindod Wells
- Replace an old drive in Brynmawr
- Replace an old drive in Tredegar
