Mid Glamorgan · Replace an old drive

Replacing tarmac or concrete with block paving in Tonypandy

Planning a replacement block drive in Tonypandy? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes CF40, CF41, CF43
  • £90–£165 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Tonypandy

Homes in Tonypandy include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.

How much does a replacement block drive cost in Tonypandy?

Guide price in Tonypandy£90–£165 per m²Including VAT at 20%

Most replacement block drive quotes in Wales fall within £90–£165 per m² including VAT. A 45 m² replacement drive would usually be about £4,000–£7,550, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£90–£165 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace
  • Levels set below the damp-proof course with falls away from the house
  • New edging, sub-base where needed, and the block drive
  • Drainage added where the old drive sent water to the house or road

Before we price your replacement block drive

  • Existing manhole and inspection covers, and whether to recess them
  • Where an electric vehicle charger cable might run
  • Steps, thresholds and door heights
  • Whether front-garden planning rules apply
  • Ground conditions under the old surface and how deep the sub-base must be

Do you need permission in Tonypandy?

Tonypandy is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Replace an old drive in Tonypandy: questions

How much does a replacement block drive cost in Tonypandy?

Our guide for Tonypandy is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.

Is the survey in Tonypandy free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a replacement block drive in Tonypandy?

In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.

Replace an old drive near Tonypandy

Nearby towns we cover for replace an old drive, and replace an old drive across Mid Glamorgan:

Other block paving services in Tonypandy

Or see all block paving services in Tonypandy.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Tonypandy, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote