Planning a replacement block drive in Aberkenfig
Around Aberkenfig, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a replacement block drive cost in Aberkenfig?
For Aberkenfig, our guide is £90–£165 per m² including VAT, so a 45 m² replacement drive is likely to be £4,000–£7,550. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
- Break-out of the old surface with waste removal and skip or grab lorry
What the survey covers
- The kerb: is it already dropped, and is it wide enough?
- Steps, thresholds and door heights
- Block range, thickness, colour and pattern to suit the house
- Ground conditions under the old surface and how deep the sub-base must be
- Trees and roots near the drive
Do you need permission in Aberkenfig?
Aberkenfig is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Replace an old drive in Aberkenfig: questions
How much does a replacement block drive cost in Aberkenfig?
Our guide for Aberkenfig is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.
Is the survey in Aberkenfig free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Do I need planning permission for a replacement block drive in Aberkenfig?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Replace an old drive near Aberkenfig
Nearby towns we cover for replace an old drive, and replace an old drive across Mid Glamorgan:
- Replace an old drive in Bridgend
- Replace an old drive in Pencoed
- Replace an old drive in Pyle
- Replace an old drive in Maesteg
- Replace an old drive in Porthcawl
- Replace an old drive in Tonyrefail
