Lincolnshire · Replace an old drive

Replacing tarmac or concrete with block paving in Stamford

Planning a replacement block drive in Stamford? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes PE9
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Stamford

Around Stamford, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.

How much does a replacement block drive cost in Stamford?

Guide price in Stamford£95–£180 per m²Including VAT at 20%

Most replacement block drive quotes in the East Midlands fall within £95–£180 per m² including VAT. A 45 m² replacement drive would usually be about £4,300–£8,100, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive
  • Assessment of the old base: keep, top up or replace
  • Levels set below the damp-proof course with falls away from the house
  • Break-out of the old surface with waste removal and skip or grab lorry

What the survey covers

  • Access for a mini-digger, skip or grab lorry
  • Where an electric vehicle charger cable might run
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Block range, thickness, colour and pattern to suit the house
  • Trees and roots near the drive

Planning and kerb rules in Stamford

Stamford is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Why choose Block Paving Contractors

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Replace an old drive in Stamford: questions

Can you match the blocks to my house in Stamford?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Stamford free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do you cover Spalding, Grantham and Oakham?

Yes. We cover Stamford and the places around it, including Spalding, Grantham and Oakham, and the rest of Lincolnshire.

Replace an old drive near Stamford

Nearby towns we cover for replace an old drive, and replace an old drive across Lincolnshire:

Other block paving services in Stamford

Or see all block paving services in Stamford.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote