Highlands · Replace an old drive

Replacing tarmac or concrete with block paving in Wick

Thinking about replacement block drives in Wick? We survey, specify and build them for homeowners across Wick and the surrounding KW postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes KW1, KW2
  • £95–£180 per m² inc VAT
  • By arrangement
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Wick

Around Wick, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

Work in the Highlands is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.

How much does a replacement block drive cost in Wick?

Guide price in Wick£95–£180 per m²Including VAT at 20%

For Wick, our guide is £95–£180 per m² including VAT, so a 45 m² replacement drive is likely to be £4,300–£8,100. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Drainage added where the old drive sent water to the house or road
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace
  • Levels set below the damp-proof course with falls away from the house
  • New edging, sub-base where needed, and the block drive

Before we price your replacement block drive

  • Access for a mini-digger, skip or grab lorry
  • Where an electric vehicle charger cable might run
  • Steps, thresholds and door heights
  • Block range, thickness, colour and pattern to suit the house
  • Trees and roots near the drive

Rules for front drives in Wick

Wick is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Replace an old drive in Wick: questions

Is the survey in Wick free?

In the Highlands we cover jobs by arrangement. We will confirm before any visit whether a charge applies, and many jobs can be priced from photos first.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do I need planning permission for a replacement block drive in Wick?

In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.

Do you cover Thurso?

Yes. We cover Wick and the places around it, including Thurso, and the rest of the Highlands.

Replace an old drive near Wick

Nearby towns we cover for replace an old drive, and replace an old drive across Highlands:

Other block paving services in Wick

Or see all block paving services in Wick.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Wick.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote