Planning a replacement block drive in Hitchin
In Hitchin, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a replacement block drive cost in Hitchin?
Guide price in Hitchin: £100–£190 per m² including VAT, which puts a 45 m² replacement drive at about £4,500–£8,500. These are East of England guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £100–£190 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Assessment of the old base: keep, top up or replace
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
- Levels set below the damp-proof course with falls away from the house
Before we price your replacement block drive
- Where rain will go: falls, lawn, border, channel or soakaway
- Where an electric vehicle charger cable might run
- Steps, thresholds and door heights
- Block range, thickness, colour and pattern to suit the house
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Planning and kerb rules in Hitchin
Hitchin is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Replace an old drive in Hitchin: questions
Do you cover Letchworth Garden City, Stevenage and Harpenden?
Yes. We cover Hitchin and the places around it, including Letchworth Garden City, Stevenage and Harpenden, and the rest of Hertfordshire.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Hitchin?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Replace an old drive near Hitchin
Nearby towns we cover for replace an old drive, and replace an old drive across Hertfordshire:
- Replace an old drive in Letchworth Garden City
- Replace an old drive in Stevenage
- Replace an old drive in Harpenden
- Replace an old drive in Welwyn Garden City
- Replace an old drive in Hatfield
- Replace an old drive in Hertford
