Hertfordshire · Replace an old drive

Replacing tarmac or concrete with block paving in Cheshunt

Thinking about replacement block drives in Cheshunt? We survey, specify and build them for homeowners across Cheshunt and the surrounding EN postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes EN8, EN7
  • £100–£190 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Cheshunt

Homes in Cheshunt include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.

How much does a replacement block drive cost in Cheshunt?

Guide price in Cheshunt£100–£190 per m²Including VAT at 20%

In the East of England, a replacement block drive usually costs £100–£190 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,500–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£100–£190 per m²
Breaking out an old surface£11–£40 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£370–£1,050
Dropped kerb (vehicle crossover) construction£1,050–£3,150

Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house
  • New edging, sub-base where needed, and the block drive
  • Assessment of the old base: keep, top up or replace

Before we price your replacement block drive

  • Trees and roots near the drive
  • Block range, thickness, colour and pattern to suit the house
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Ground conditions under the old surface and how deep the sub-base must be
  • The kerb: is it already dropped, and is it wide enough?

Rules for front drives in Cheshunt

Cheshunt is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Replace an old drive in Cheshunt: questions

Do you cover Hoddesdon, Potters Bar and Hertford?

Yes. We cover Cheshunt and the places around it, including Hoddesdon, Potters Bar and Hertford, and the rest of Hertfordshire.

Do I need planning permission for a replacement block drive in Cheshunt?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How much does a replacement block drive cost in Cheshunt?

Our guide for Cheshunt is £100–£190 per m² including VAT, so a 45 m² replacement drive is usually about £4,500–£8,500. Your fixed price follows the survey.

Replace an old drive near Cheshunt

Nearby towns we cover for replace an old drive, and replace an old drive across Hertfordshire:

Other block paving services in Cheshunt

Or see all block paving services in Cheshunt.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Cheshunt.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote