Replacing tarmac or concrete with block paving in Eastleigh: the local picture
In Eastleigh, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a replacement block drive cost in Eastleigh?
Guide price in Eastleigh: £105–£195 per m² including VAT, which puts a 45 m² replacement drive at about £4,600–£8,750. These are South East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £105–£195 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
Before we price your replacement block drive
- Edges against lawns, beds, walls and neighbours
- Where an electric vehicle charger cable might run
- Trees and roots near the drive
- Steps, thresholds and door heights
- Block range, thickness, colour and pattern to suit the house
Do you need permission in Eastleigh?
Eastleigh is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Replace an old drive in Eastleigh: questions
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover Southampton, Winchester and Totton?
Yes. We cover Eastleigh and the places around it, including Southampton, Winchester and Totton, and the rest of Hampshire.
How much does a replacement block drive cost in Eastleigh?
Our guide for Eastleigh is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.
Replace an old drive near Eastleigh
Nearby towns we cover for replace an old drive, and replace an old drive across Hampshire:
- Replace an old drive in Southampton
- Replace an old drive in Winchester
- Replace an old drive in Totton
- Replace an old drive in Hythe
- Replace an old drive in Fareham
- Replace an old drive in Waterlooville
