Replacing tarmac or concrete with block paving in Hyde: the local picture
Hyde is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a replacement block drive cost in Hyde?
Guide price in Hyde: £95–£180 per m² including VAT, which puts a 45 m² replacement drive at about £4,300–£8,100. These are North West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
- New edging, sub-base where needed, and the block drive
- Break-out of the old surface with waste removal and skip or grab lorry
What we check on a Hyde survey
- Block range, thickness, colour and pattern to suit the house
- Edges against lawns, beds, walls and neighbours
- Access for a mini-digger, skip or grab lorry
- Whether front-garden planning rules apply
- Trees and roots near the drive
Planning and kerb rules in Hyde
Hyde is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Replace an old drive in Hyde: questions
Can you match the blocks to my house in Hyde?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Is the survey in Hyde free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a replacement block drive cost in Hyde?
Our guide for Hyde is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Do I need planning permission for a replacement block drive in Hyde?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Replace an old drive near Hyde
Nearby towns we cover for replace an old drive, and replace an old drive across Greater Manchester:
- Replace an old drive in Denton
- Replace an old drive in Stalybridge
- Replace an old drive in Ashton-under-Lyne
- Replace an old drive in Droylsden
- Replace an old drive in Stockport
- Replace an old drive in Hazel Grove
