Dundee and Angus · Replace an old drive

Replacing tarmac or concrete with block paving in Carnoustie

We quote replacement block drives throughout Carnoustie and Dundee and Angus. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes DD7
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Carnoustie

In and around Carnoustie, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a replacement block drive cost in Carnoustie?

Guide price in Carnoustie£95–£180 per m²Including VAT at 20%

Guide price in Carnoustie: £95–£180 per m² including VAT, which puts a 45 m² replacement drive at about £4,300–£8,100. These are Scotland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Levels set below the damp-proof course with falls away from the house
  • Drainage added where the old drive sent water to the house or road
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace
  • New edging, sub-base where needed, and the block drive

Before we price your replacement block drive

  • Trees and roots near the drive
  • Existing manhole and inspection covers, and whether to recess them
  • Whether front-garden planning rules apply
  • The kerb: is it already dropped, and is it wide enough?
  • Where an electric vehicle charger cable might run

Do you need permission in Carnoustie?

Carnoustie is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Replace an old drive in Carnoustie: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Is the survey in Carnoustie free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do you cover Monifieth, Arbroath and Dundee?

Yes. We cover Carnoustie and the places around it, including Monifieth, Arbroath and Dundee, and the rest of Dundee and Angus.

Replace an old drive near Carnoustie

Nearby towns we cover for replace an old drive, and replace an old drive across Dundee and Angus:

Other block paving services in Carnoustie

Or see all block paving services in Carnoustie.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote