County Antrim · Replace an old drive

Replacing tarmac or concrete with block paving in Ballyclare

If you are in Ballyclare (BT39) and want a replacement block drive, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes BT39
  • £90–£170 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Ballyclare

Ballyclare is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.

How much does a replacement block drive cost in Ballyclare?

Guide price in Ballyclare£90–£170 per m²Including VAT at 20%

In Northern Ireland, a replacement block drive usually costs £90–£170 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,050–£7,700. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£90–£170 per m²
Breaking out an old surface£9.50–£40 per m²
Edging or kerb, bedded and haunched£19–£50 per metre
Typical channel drain run£330–£950
Dropped kerb (vehicle crossover) construction£950–£2,850

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Drainage added where the old drive sent water to the house or road
  • Assessment of the old base: keep, top up or replace
  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Levels set below the damp-proof course with falls away from the house

Before we price your replacement block drive

  • Whether front-garden planning rules apply
  • Access for a mini-digger, skip or grab lorry
  • Existing manhole and inspection covers, and whether to recess them
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Edges against lawns, beds, walls and neighbours

Planning and kerb rules in Ballyclare

Ballyclare is in Northern Ireland, so these rules apply:

In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.

Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.

Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Replace an old drive in Ballyclare: questions

Can you match the blocks to my house in Ballyclare?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Is the survey in Ballyclare free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Replace an old drive near Ballyclare

Nearby towns we cover for replace an old drive, and replace an old drive across County Antrim:

Other block paving services in Ballyclare

Or see all block paving services in Ballyclare.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Ballyclare.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote