Planning a replacement block drive in Ampthill
In and around Ampthill, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.
How much does a replacement block drive cost in Ampthill?
Most replacement block drive quotes in the East of England fall within £100–£190 per m² including VAT. A 45 m² replacement drive would usually be about £4,500–£8,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £100–£190 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
What the survey covers
- Where rain will go: falls, lawn, border, channel or soakaway
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Trees and roots near the drive
- Where an electric vehicle charger cable might run
- Ground conditions under the old surface and how deep the sub-base must be
Do you need permission in Ampthill?
Ampthill is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Replace an old drive in Ampthill: questions
How much does a replacement block drive cost in Ampthill?
Our guide for Ampthill is £100–£190 per m² including VAT, so a 45 m² replacement drive is usually about £4,500–£8,500. Your fixed price follows the survey.
Do I need planning permission for a replacement block drive in Ampthill?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Do you cover Kempston, Bedford and Dunstable?
Yes. We cover Ampthill and the places around it, including Kempston, Bedford and Dunstable, and the rest of Bedfordshire.
Can you match the blocks to my house in Ampthill?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Replace an old drive near Ampthill
Nearby towns we cover for replace an old drive, and replace an old drive across Bedfordshire:
- Replace an old drive in Kempston
- Replace an old drive in Bedford
- Replace an old drive in Dunstable
- Replace an old drive in Leighton Buzzard
- Replace an old drive in Luton
