How much does a replacement block drive cost in Aberdeen and Aberdeenshire?
For Aberdeen and Aberdeenshire, our guide is £95–£180 per m² including VAT, so a 45 m² replacement drive is likely to be £4,300–£8,100. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Aberdeen and Aberdeenshire
Choose a town for local prices and details for replace an old drive:
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
What the survey covers
- Edges against lawns, beds, walls and neighbours
- Whether front-garden planning rules apply
- Steps, thresholds and door heights
- Trees and roots near the drive
- Where an electric vehicle charger cable might run
Rules for front drives in Aberdeen and Aberdeenshire
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Replace an old drive in Aberdeen and Aberdeenshire: questions
Do you cover Aberdeen, Peterhead and Inverurie?
Yes. We cover all of Aberdeen and Aberdeenshire, including Aberdeen, Peterhead and Inverurie.
Can you match the blocks to my house in Aberdeen and Aberdeenshire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a replacement block drive cost in Aberdeen and Aberdeenshire?
Our guide for Aberdeen and Aberdeenshire is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
