England · Re-sanding

Re-sanding and re-jointing in Warwickshire

Re-sanding and re-jointing in Warwickshire: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • 7 towns listed
  • £3–£10 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Warwickshire?

Guide price in Warwickshire£3–£10 per m²Including VAT at 20%

For Warwickshire, our guide is £3–£10 per m² including VAT, so a 50 m² drive is likely to be £200–£500. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£10 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the West Midlands, checked 9 November 2026.

Towns we cover in Warwickshire

We quote re-sanding in every town across Warwickshire, including:

What is included?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

  • Plate compactor with a rubber pad to settle the sand
  • Kiln-dried sand brushed into every joint
  • Second top-up and surplus swept off
  • Surface swept and dried

How we find the cause

  • How much joint sand is left
  • Type of block and its age
  • Shade and drainage, which affect regrowth
  • Moss, algae, weeds and oil staining
  • Whether the paving is permeable (no sand, no sealing with the wrong product)

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Re-sanding in Warwickshire: questions

Do you cover Nuneaton, Rugby and Leamington Spa?

Yes. We cover all of Warwickshire, including Nuneaton, Rugby and Leamington Spa.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a re-sanding job cost in Warwickshire?

Guide price for Warwickshire: £3–£10 per m² including VAT, with a minimum charge for small areas.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote