England · Re-sanding

Re-sanding and re-jointing in Northamptonshire

Re-sanding and re-jointing in Northamptonshire: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • 7 towns listed
  • £3–£10 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Northamptonshire?

Guide price in Northamptonshire£3–£10 per m²Including VAT at 20%

Expect re-sanding jobs in Northamptonshire to come in at around £3–£10 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £200 and £500.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£10 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the East Midlands, checked 9 November 2026.

Towns we cover in Northamptonshire

We quote re-sanding in every town across Northamptonshire, including:

What does a re-sanding job involve?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.

  • Second top-up and surplus swept off
  • Plate compactor with a rubber pad to settle the sand
  • Surface swept and dried
  • Kiln-dried sand brushed into every joint

How we find the cause

  • Shade and drainage, which affect regrowth
  • Whether any blocks are loose or sunken first
  • Moss, algae, weeds and oil staining
  • Type of block and its age
  • Walls, doors and planting to protect

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Re-sanding in Northamptonshire: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Do you cover Northampton, Corby and Kettering?

Yes. We cover all of Northamptonshire, including Northampton, Corby and Kettering.

How often should block paving in Northamptonshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote