How much does a permeable block drive cost in Worcestershire?
Most permeable block drive quotes in the West Midlands fall within £105–£170 per m² including VAT. A 50 m² drive would usually be about £5,250–£8,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026.
Towns we cover in Worcestershire
Choose a town for local prices and details for permeable paving:
What is included?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
- Ground check: how well the soil drains and how high the water table sits
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
- Open-graded crushed stone (no fines) laid and compacted in layers
- Deeper dig-out for the open-graded sub-base
What the survey covers
- Where an electric vehicle charger cable might run
- Where rain will go: falls, lawn, border, channel or soakaway
- Block range, thickness, colour and pattern to suit the house
- Trees and roots near the drive
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Worcestershire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Permeable paving in Worcestershire: questions
Do I need planning permission for a permeable block drive in Worcestershire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Do you cover Worcester, Redditch and Kidderminster?
Yes. We cover all of Worcestershire, including Worcester, Redditch and Kidderminster.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
