Suffolk · Permeable paving

Permeable block paving in Felixstowe

From IP11, IP10 to the villages around Felixstowe, we quote permeable block drives built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes IP11, IP10
  • £110–£180 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Permeable block paving in Felixstowe: the local picture

Felixstowe is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.

How much does a permeable block drive cost in Felixstowe?

Guide price in Felixstowe£110–£180 per m²Including VAT at 20%

For Felixstowe, our guide is £110–£180 per m² including VAT, so a 50 m² drive is likely to be £5,500–£8,950. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Permeable block paving driveway£110–£180 per m²
Breaking out an old surface£11–£40 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£370–£1,050
Dropped kerb (vehicle crossover) construction£1,050–£3,150

Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Edge restraints and any overflow or outlet the design needs
  • Geotextile layer where the design needs one
  • Deeper dig-out for the open-graded sub-base
  • Ground check: how well the soil drains and how high the water table sits
  • Open-graded crushed stone (no fines) laid and compacted in layers

Before we price your permeable block drive

  • Existing manhole and inspection covers, and whether to recess them
  • Steps, thresholds and door heights
  • Block range, thickness, colour and pattern to suit the house
  • Ground conditions under the old surface and how deep the sub-base must be
  • Whether front-garden planning rules apply

Rules for front drives in Felixstowe

Felixstowe is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Permeable paving in Felixstowe: questions

How much does a permeable block drive cost in Felixstowe?

Our guide for Felixstowe is £110–£180 per m² including VAT, so a 50 m² drive is usually about £5,500–£8,950. Your fixed price follows the survey.

Can you match the blocks to my house in Felixstowe?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do I need planning permission for a permeable block drive in Felixstowe?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Permeable paving near Felixstowe

Nearby towns we cover for permeable paving, and permeable paving across Suffolk:

Other block paving services in Felixstowe

Or see all block paving services in Felixstowe.

Next step

Get a guide price in two minutes

Ready to talk about your permeable block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote