Planning a permeable block drive in Dinas Powys
Dinas Powys is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a permeable block drive cost in Dinas Powys?
Guide price in Dinas Powys: £100–£160 per m² including VAT, which puts a 50 m² drive at about £4,900–£7,900. These are Wales guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £100–£160 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Open-graded crushed stone (no fines) laid and compacted in layers
- Grit laying course and permeable blocks with grit-filled joints
- Deeper dig-out for the open-graded sub-base
- Geotextile layer where the design needs one
- Ground check: how well the soil drains and how high the water table sits
Before we price your permeable block drive
- Block range, thickness, colour and pattern to suit the house
- Access for a mini-digger, skip or grab lorry
- Where an electric vehicle charger cable might run
- Whether front-garden planning rules apply
- Ground conditions under the old surface and how deep the sub-base must be
Planning and kerb rules in Dinas Powys
Dinas Powys is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Permeable paving in Dinas Powys: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover Penarth, Cardiff and Barry?
Yes. We cover Dinas Powys and the places around it, including Penarth, Cardiff and Barry, and the rest of South Glamorgan.
How much does a permeable block drive cost in Dinas Powys?
Our guide for Dinas Powys is £100–£160 per m² including VAT, so a 50 m² drive is usually about £4,900–£7,900. Your fixed price follows the survey.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Permeable paving near Dinas Powys
Nearby towns we cover for permeable paving, and permeable paving across South Glamorgan:
- Permeable paving in Penarth
- Permeable paving in Cardiff
- Permeable paving in Barry
- Permeable paving in Rhiwbina
- Permeable paving in Llantwit Major
