Permeable block paving in Nailsea: the local picture
In and around Nailsea, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a permeable block drive cost in Nailsea?
For Nailsea, our guide is £105–£170 per m² including VAT, so a 50 m² drive is likely to be £5,250–£8,500. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
- Ground check: how well the soil drains and how high the water table sits
- Deeper dig-out for the open-graded sub-base
- Geotextile layer where the design needs one
Before we price your permeable block drive
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
- Existing manhole and inspection covers, and whether to recess them
- Where an electric vehicle charger cable might run
- Ground conditions under the old surface and how deep the sub-base must be
Planning and kerb rules in Nailsea
Nailsea is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Permeable paving in Nailsea: questions
Is the survey in Nailsea free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Nailsea?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover Portishead, Clevedon and Weston-super-Mare?
Yes. We cover Nailsea and the places around it, including Portishead, Clevedon and Weston-super-Mare, and the rest of Somerset.
Permeable paving near Nailsea
Nearby towns we cover for permeable paving, and permeable paving across Somerset:
- Permeable paving in Portishead
- Permeable paving in Clevedon
- Permeable paving in Weston-super-Mare
- Permeable paving in Burnham-on-Sea
- Permeable paving in Bath
- Permeable paving in Bridgwater
