Scottish Borders · Permeable paving

Permeable block paving in Galashiels

Thinking about permeable block drives in Galashiels? We survey, specify and build them for homeowners across Galashiels and the surrounding TD postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes TD1, TD6, TD4
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

What to know before a permeable block drive in Galashiels

Galashiels is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a permeable block drive cost in Galashiels?

Guide price in Galashiels£105–£170 per m²Including VAT at 20%

Guide price in Galashiels: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,500. These are Scotland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Edge restraints and any overflow or outlet the design needs
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Ground check: how well the soil drains and how high the water table sits
  • Deeper dig-out for the open-graded sub-base
  • Geotextile layer where the design needs one

Before we price your permeable block drive

  • Where rain will go: falls, lawn, border, channel or soakaway
  • Trees and roots near the drive
  • Block range, thickness, colour and pattern to suit the house
  • Edges against lawns, beds, walls and neighbours
  • Ground conditions under the old surface and how deep the sub-base must be

Do you need permission in Galashiels?

Galashiels is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Permeable paving in Galashiels: questions

How much does a permeable block drive cost in Galashiels?

Our guide for Galashiels is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.

Can you match the blocks to my house in Galashiels?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Is the survey in Galashiels free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Permeable paving near Galashiels

Nearby towns we cover for permeable paving, and permeable paving across Scottish Borders:

Other block paving services in Galashiels

Or see all block paving services in Galashiels.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote