How much does a permeable block drive cost in Moray?
Guide price in Moray: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,500. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Moray
Choose a town for local prices and details for permeable paving:
What does a permeable block drive involve?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Geotextile layer where the design needs one
- Deeper dig-out for the open-graded sub-base
- Ground check: how well the soil drains and how high the water table sits
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
What the survey covers
- Where an electric vehicle charger cable might run
- Access for a mini-digger, skip or grab lorry
- Where rain will go: falls, lawn, border, channel or soakaway
- The kerb: is it already dropped, and is it wide enough?
- Block range, thickness, colour and pattern to suit the house
Rules for front drives in Moray
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Permeable paving in Moray: questions
Do you cover Elgin, Forres and Buckie?
Yes. We cover all of Moray, including Elgin, Forres and Buckie.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Is the survey in Moray free?
In Moray we cover jobs by arrangement. We will confirm before any visit whether a charge applies, and many jobs can be priced from photos first.
Can you match the blocks to my house in Moray?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
