What to know before a permeable block drive in Garston
Garston is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a permeable block drive cost in Garston?
Most permeable block drive quotes in the North West fall within £105–£170 per m² including VAT. A 50 m² drive would usually be about £5,250–£8,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a permeable block drive involve?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Geotextile layer where the design needs one
- Ground check: how well the soil drains and how high the water table sits
- Open-graded crushed stone (no fines) laid and compacted in layers
- Edge restraints and any overflow or outlet the design needs
- Grit laying course and permeable blocks with grit-filled joints
What we check on a Garston survey
- Where rain will go: falls, lawn, border, channel or soakaway
- The kerb: is it already dropped, and is it wide enough?
- Ground conditions under the old surface and how deep the sub-base must be
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
Rules for front drives in Garston
Garston is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Permeable paving in Garston: questions
Do you cover Speke, Halewood and Bebington?
Yes. We cover Garston and the places around it, including Speke, Halewood and Bebington, and the rest of Merseyside.
How much does a permeable block drive cost in Garston?
Our guide for Garston is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Can you match the blocks to my house in Garston?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Permeable paving near Garston
Nearby towns we cover for permeable paving, and permeable paving across Merseyside:
- Permeable paving in Speke
- Permeable paving in Halewood
- Permeable paving in Bebington
- Permeable paving in Huyton
- Permeable paving in Liverpool
- Permeable paving in Birkenhead
