What to know before a permeable block drive in Ormskirk
Around Ormskirk, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a permeable block drive cost in Ormskirk?
In the North West, a permeable block drive usually costs £105–£170 per m² including VAT. For a 50 m² drive, that is roughly £5,250–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Open-graded crushed stone (no fines) laid and compacted in layers
- Edge restraints and any overflow or outlet the design needs
- Deeper dig-out for the open-graded sub-base
- Ground check: how well the soil drains and how high the water table sits
- Geotextile layer where the design needs one
What we check on an Ormskirk survey
- Trees and roots near the drive
- Steps, thresholds and door heights
- The kerb: is it already dropped, and is it wide enough?
- Where rain will go: falls, lawn, border, channel or soakaway
- Edges against lawns, beds, walls and neighbours
Planning and kerb rules in Ormskirk
Ormskirk is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Permeable paving in Ormskirk: questions
Can you match the blocks to my house in Ormskirk?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a permeable block drive cost in Ormskirk?
Our guide for Ormskirk is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do you cover Skelmersdale, Leyland and Chorley?
Yes. We cover Ormskirk and the places around it, including Skelmersdale, Leyland and Chorley, and the rest of Lancashire.
Permeable paving near Ormskirk
Nearby towns we cover for permeable paving, and permeable paving across Lancashire:
- Permeable paving in Skelmersdale
- Permeable paving in Leyland
- Permeable paving in Chorley
- Permeable paving in Lytham St Annes
- Permeable paving in Preston
- Permeable paving in Blackpool
