Permeable block paving in Folkestone: the local picture
Folkestone is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a permeable block drive cost in Folkestone?
Guide price in Folkestone: £115–£185 per m² including VAT, which puts a 50 m² drive at about £5,650–£9,200. These are South East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £115–£185 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Deeper dig-out for the open-graded sub-base
- Open-graded crushed stone (no fines) laid and compacted in layers
- Ground check: how well the soil drains and how high the water table sits
- Edge restraints and any overflow or outlet the design needs
- Geotextile layer where the design needs one
What we check on a Folkestone survey
- Where an electric vehicle charger cable might run
- Ground conditions under the old surface and how deep the sub-base must be
- Block range, thickness, colour and pattern to suit the house
- Trees and roots near the drive
- Steps, thresholds and door heights
Planning and kerb rules in Folkestone
Folkestone is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Permeable paving in Folkestone: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a permeable block drive in Folkestone?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How much does a permeable block drive cost in Folkestone?
Our guide for Folkestone is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.
Permeable paving near Folkestone
Nearby towns we cover for permeable paving, and permeable paving across Kent:
- Permeable paving in Dover
- Permeable paving in Ashford, Kent
- Permeable paving in Deal
- Permeable paving in Canterbury
- Permeable paving in Faversham
- Permeable paving in Herne Bay
