How much does a permeable block drive cost in Isle of Wight?
Most permeable block drive quotes in the South East fall within £115–£185 per m² including VAT. A 50 m² drive would usually be about £5,650–£9,200, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £115–£185 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026.
Towns we cover in Isle of Wight
Choose a town for local prices and details for permeable paving:
What is included?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
- Open-graded crushed stone (no fines) laid and compacted in layers
- Ground check: how well the soil drains and how high the water table sits
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
- Grit laying course and permeable blocks with grit-filled joints
What the survey covers
- Trees and roots near the drive
- Whether front-garden planning rules apply
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Rules for front drives in Isle of Wight
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Permeable paving in Isle of Wight: questions
How much does a permeable block drive cost in Isle of Wight?
Our guide for Isle of Wight is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.
Can you match the blocks to my house in Isle of Wight?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do you cover Newport, Isle of Wight, Ryde and Cowes?
Yes. We cover all of the Isle of Wight, including Newport, Isle of Wight, Ryde and Cowes.
